Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Emergency Prep

Best Water Storage Tank Level Sensor (2026): 5 Compared

Five water storage tank level sensors compared on range, connection, protection and warranty, from WiFi ultrasonic monitors to a float switch and RV probes.

Best Water Storage Tank Level Sensor (2026): 5 Compared
On this page

When the tank on the porch runs dry or the cistern overflows in the night, a level sensor is the difference between a surprise and a warning, and the best water storage tank level sensor is the one that matches your tank, your wiring and the way you want the reading. This roundup compares five sensors for water storage tanks, cisterns and RV tanks, on range, connection, protection and warranty. Two of them report to a phone app, one sits under the water, one floats a switch and one screws into an RV tank wall.

SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • MORAYELEC ME201R WiFi Sensor
    Best Overall MORAYELEC ME201R WiFi Sensor: LCD monitor, WiFi plus RF433, and alerts for up to 10 sensors Check price on Amazon
  • MORAYELEC ME201W WiFi Sensor
    Best WiFi Monitor MORAYELEC ME201W WiFi Sensor: ultrasonic monitor with app alerts and custom alarm limits Check price on Amazon
  • Tbest TL-136 Level Sensor
    Best Submersible Tbest TL-136 Level Sensor: IP68 submersible sensor with a 4-20mA output for 24VDC systems Check price on Amazon
  • ELECALL ES7510 Float Switch
    Best Float Switch ELECALL ES7510 Float Switch: stainless steel float switch with NO+NC contacts for 110V Check price on Amazon
  • Homhelar RV Probe Sensors
    Best RV Pack Homhelar RV Probe Sensors: 8 screw-in probes with grommets for fresh, gray and black tanks Check price on Amazon

The kits we chose

MORAYELEC ME201R WiFi Sensor

MORAYELEC ME201R WiFi Sensor

MORAYELEC9.7/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A WiFi ultrasonic water level sensor with an LCD monitor, app alerts and RF433 backup, for tanks from 10cm to 4m.

Pros

  • LCD monitor plus Tuya Smart Life app for remote checks
  • WiFi and RF433 with up to 300m range in open areas
  • IP66 protection with CE, RoHS and REACH certifications stated
  • 1 year manufacturer warranty stated

Cons

  • Orange is the only color stated
  • Needs a 2.4GHz WiFi network for remote monitoring
  • No wired output is stated
  • No submersible option is stated
Detailed Review

The maker states a smart WiFi ultrasonic sensor with an LCD monitor for water tank and cistern levels, checked remotely through the Tuya Smart Life app with support for up to 10 sensors. Detection runs 10cm to 4m with non-contact ultrasonic technology, and the 2.4GHz WiFi pairs with an RF433 link that reaches up to 300m in obstacle-free open areas and through up to 20 walls. It states IP66 protection with CE, RoHS and REACH certifications, works from -10℃ to +70℃, mounts on top of the tank and sends custom high and low level notifications through the app. The maker lists a 1 year manufacturer warranty.

Who it's for: owners of one or more tanks who want levels on a phone with an LCD at the tank. Who should skip it: anyone without a 2.4GHz WiFi network at the tank.

Its Solar Score of 9.7/10 comes from performance 33/35, build 22/25, value 21/25, safety 8/10 and warranty 3/5: 87 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Range10cm-4m
ConnectionWiFi + RF433
ProtectionIP66
Warranty1 year manufacturer

Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.

Safety and Warranty

What this listing states. IP66 protection, CE, RoHS and REACH certifications stated, so safety scores 8 of 10. 1 Year Manufacturer warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Follow the manual. Connect and use the product as the maker describes, stay within every stated rating, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MORAYELEC ME201W WiFi Sensor

MORAYELEC ME201W WiFi Sensor

MORAYELEC9.7/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A WiFi ultrasonic tank level monitor with app alerts and custom alarm limits, for tanks from 0.1m to 5m.

Pros

  • Tuya Smart Life app with full and low level notifications
  • Custom alarm limits to avoid overflow or shortages
  • IP66 protection with CE, RoHS and REACH certifications stated
  • 1 year manufacturer warranty stated

Cons

  • Orange is the only color stated
  • No LCD is stated
  • No RF433 link is stated
  • Needs a home WiFi network for remote monitoring
Detailed Review

The maker states a smart WiFi ultrasonic tank level monitor with a 0.1-5m gauge, checked through the Tuya Smart Life app with support for up to 10 sensors. Detection uses non-contact ultrasonic technology at 10cm to 4m, and the 2.4G WiFi link reaches 30m in obstacle-free areas. It states IP66 protection with CE, RoHS and REACH certifications, works from -10℃ to +70℃, mounts on top of the tank and sends full and low level notifications with custom alarm limits. The maker gives two upper limits for the range, 4m and 5m; check before ordering. The maker lists a 1 year manufacturer warranty.

Who it's for: owners who want app alerts with custom limits on a cistern or well. Who should skip it: anyone who needs an LCD at the tank, who should look at the ME201R instead.

Its Solar Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 3/5: 86 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Range0.1-5m
Connection2.4G WiFi
ProtectionIP66
Warranty1 year manufacturer

Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.

Safety and Warranty

What this listing states. IP66 protection, CE, RoHS and REACH certifications stated, so safety scores 8 of 10. 1 Year Manufacturer warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Follow the manual. Connect and use the product as the maker describes, stay within every stated rating, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Tbest TL-136 Level Sensor

Tbest TL-136 Level Sensor

Tbest9.6/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A submersible level transmitter with a 4-20mA output for 24VDC systems, rated IP68 for ranges of 0 to 2 meters.

Pros

  • IP68 multi-layer protection for harsh or wet environments
  • 4-20mA output with an all-digital conditioning circuit
  • 45-degree oblique angle with a detachable anti-blocking design
  • Measures water and other non-corrosive liquids

Cons

  • No warranty term is stated
  • Range tops out at 0-2 meters, so it suits shallow tanks
  • Needs a 24VDC supply and a 4-20mA input
  • No app or display is stated
Detailed Review

The maker states a submersible liquid level transmitter with a high-precision diffusion silicon sensor, an all-digital conditioning circuit and a stable 4-20mA signal output at 24VDC, for a range of 0 to 2 meters. It states IP68 multi-layer protection, a 45-degree oblique angle for shock resistance and a detachable anti-blocking feature, and it suits water and other non-corrosive liquids.

Who it's for: owners who want a wired submersible sensor on a 24VDC system with a 4-20mA reading. Who should skip it: anyone who wants a phone app or a wireless reading.

Its Solar Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 9/10 and warranty 0/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Range0-2 meters
Output4-20mA
Supply24VDC
ProtectionIP68

Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.

Safety and Warranty

What this listing states. IP68 multi-layer protection stated, 45-degree oblique angle, detachable anti-blocking design, so safety scores 9 of 10. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Connect and use the product as the maker describes, stay within every stated rating, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ELECALL ES7510 Float Switch

ELECALL ES7510 Float Switch

ELECALL9.6/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stainless steel float switch for 110V systems, with NO+NC contacts and a 12 inch wire, for top or base mounting.

Pros

  • Stainless steel construction for water, chemical and drainage use
  • NO+NC contacts with a 10W maximum
  • Mounts at the top or base of the tank to catch a rise or a fall
  • Simple design with no complex circuit to be disturbed

Cons

  • No warranty term is stated
  • Needs a relay to drive a pump, indicator or alarm
  • No wireless or app option is stated
  • Silver is the only color stated
Detailed Review

The maker states a stainless steel float switch for 110V systems, with NO+NC contacts, a 10W maximum, a 12 inch wire and a 110V AC/DC max breakdown voltage. It has no complex circuit and will not be disturbed, and it mounts vertically at the top or base of the tank to catch a rise or a fall. It can switch a pump, an indicator or an alarm, but it needs to be used with a relay.

Who it's for: owners who want a simple wired float switch to drive a pump or alarm through a relay. Who should skip it: anyone who wants a level reading instead of a switch point.

Its Solar Score of 9.6/10 comes from performance 28/35, build 21/25, value 21/25, safety 6/10 and warranty 0/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Voltage110V AC/DC
ContactsNO+NC, 10W maximum
Wire length12 inch
MaterialStainless steel

Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.

Safety and Warranty

What this listing states. Stainless steel construction, NO+NC contacts, 110V AC/DC maximum breakdown voltage stated, so safety scores 6 of 10. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Connect and use the product as the maker describes, stay within every stated rating, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Homhelar RV Probe Sensors

Homhelar RV Probe Sensors

Homhelar9.5/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Eight screw-in RV tank probe sensors with vulcanized grommets, for fresh, gray and black water tanks.

Pros

  • 8 probes in the pack for fresh, gray and black tanks
  • Vulcanized grommet with a collapsing pressure system for a tight seal
  • Rust-resistant post and hardware
  • Screw-in fit for RV tanks

Cons

  • Probes only, with no monitor or display stated
  • Seal depends on proper installation
  • No wireless or app option is stated
  • 8 probes suit an RV with three tanks, not a single home tank
Detailed Review

The maker states 8 RV water tank probe sensors, made from a vulcanized grommet, a sensor post, a washer and 3/8 inch nuts, with a rust-resistant post and hardware. A collapsing pressure system seals the probe if it is properly installed, and the pack covers fresh water, gray water and black water tanks.

Who it's for: RV owners who want screw-in probes for fresh, gray and black tanks. Who should skip it: anyone who wants a level reading on a phone or a display.

Its Solar Score of 9.5/10 comes from performance 27/35, build 20/25, value 21/25, safety 5/10 and warranty 0/5: 73 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pack8 probe sensors
PartsGrommet, post, washer, nut
FitScrew-in, RV tanks
TanksFresh, gray, black

Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.

Safety and Warranty

What this listing states. Vulcanized grommet seal, rust-resistant post and hardware stated, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Connect and use the product as the maker describes, stay within every stated rating, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

More picks to compare

  • MySpool WiFi Water Level SensorMySpool WiFi Water Level SensorWiFi sensor with text and email alerts and a float on a 5-foot wire.Check on Amazon
  • Walfront Float Switch SensorWalfront Float Switch SensorPlastic float switch with a 40cm cable for aquariums, pumps and water tanks.Check on Amazon
  • Generic Non Contact Level SensorGeneric Non Contact Level SensorNon-contact sensor with IP67 protection that mounts outside the tank with glue or ties.Check on Amazon
  • Generic Capacitive Level SensorGeneric Capacitive Level SensorNon-contact capacitive sensor for non-metallic tanks, with IP67 protection and adjustable sensitivity.Check on Amazon
  • briidea RV Tank Monitor Panelbriidea RV Tank Monitor PanelRV tank monitor panel with LED indicator for depths up to 13 ft.Check on Amazon

Numbers side by side

Sensor Solar Score Type Range Connection Warranty Amazon
MORAYELEC ME201R WiFi Sensor 9.7/10 Ultrasonic, WiFi 10cm-4m WiFi + RF433 1 year View on Amazon
MORAYELEC ME201W WiFi Sensor 9.7/10 Ultrasonic, WiFi 0.1-5m WiFi 1 year View on Amazon
Tbest TL-136 Level Sensor 9.6/10 Submersible, 4-20mA 0-2 meters Wired 4-20mA Not stated View on Amazon
ELECALL ES7510 Float Switch 9.6/10 Float switch Not stated Wired, 12 inch wire Not stated View on Amazon
Homhelar RV Probe Sensors 9.5/10 Probe, screw-in Not stated Wired Not stated View on Amazon

We copied each rating from the seller’s listing as the brand states it; data date 14 November 2026.

Where the points went

The Solar Score weighs performance, build, value, safety and warranty. For a level sensor, safety means IP protection, certifications and a design that keeps water out of the electronics; a sensor that states none of those scores zero on that line. Two of the five sensors state a 1 year warranty, and the other three state no warranty term. How we pick explains the weights.

Product Solar Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
MORAYELEC ME201R WiFi Sensor 9.7 33 22 21 8 3
MORAYELEC ME201W WiFi Sensor 9.7 32 22 21 8 3
Tbest TL-136 Level Sensor 9.6 29 21 20 9 0
ELECALL ES7510 Float Switch 9.6 28 21 21 6 0
Homhelar RV Probe Sensors 9.5 27 20 21 5 0

We place weighted points on a scale whose ends are 9.2 and 9.8. Because the mapping is straight, a unit with more points never shows less.

How to choose the best water storage tank level sensor

Ultrasonic, submersible or float switch

The five sensors here fall into four kinds, and the kind sets how it reads the level. The two MORAYELEC sensors read the level with non-contact ultrasonic technology from the top of the tank, the Tbest sensor sits under the water as a submersible transmitter, the ELECALL switch floats on the water to open or close a contact, and the Homhelar probes screw into the tank wall to sense the level at a point. A non-contact sensor never touches the water, a submersible sensor reads continuously, and a float switch or probe gives a point reading for a pump or an alarm. Pick the kind that fits how you use the tank.

Range and tank depth

Range is the first figure to match against your tank. The Tbest sensor covers 0 to 2 meters, the ME201R covers 10cm to 4m, and the ME201W is listed at 0.1 to 5m, so the ultrasonic sensors cover deeper tanks than the submersible one. The ELECALL float switch and the Homhelar probes state no range, since they sense a point rather than a depth. Measure your tank depth before ordering, and see the water tank maintenance guide for keeping the tank itself in shape.

Sensor Type Range
MORAYELEC ME201R WiFi Sensor Ultrasonic, WiFi 10cm-4m
MORAYELEC ME201W WiFi Sensor Ultrasonic, WiFi 0.1-5m
Tbest TL-136 Level Sensor Submersible, 4-20mA 0-2 meters
ELECALL ES7510 Float Switch Float switch Not stated
Homhelar RV Probe Sensors Probe, screw-in Not stated

App, alerts and wiring

Two sensors here talk to a phone, and the rest are wired. Both MORAYELEC sensors report through the Tuya Smart Life app, support up to 10 sensors for multi-tank monitoring, and send high and low level notifications, with the ME201W adding custom alarm limits. The ME201R pairs 2.4GHz WiFi with an RF433 link that reaches up to 300m in obstacle-free open areas and through up to 20 walls, while the ME201W uses 2.4G WiFi with a 30m obstacle-free range. The Tbest sensor is wired, with a 4-20mA output at 24VDC, and the ELECALL float switch needs a relay to drive a pump, an indicator or an alarm. See the solar water pump for cistern guide for the pump side of a cistern setup.

Protection and temperature

Protection decides whether a sensor survives where it lives. The Tbest sensor states IP68 multi-layer protection with a 45-degree oblique angle and a detachable anti-blocking design, and the two MORAYELEC sensors state IP66 protection with CE, RoHS and REACH certifications. Both MORAYELEC sensors work from -10℃ to +70℃, which covers most weather. The ELECALL switch is stainless steel with no complex circuit, and the Homhelar probes use a vulcanized grommet and rust-resistant hardware. Match the protection to the spot: under water, on top of the tank, or screwed into the wall.

Sizing Notes

  • Match the range to your tank depth: the sensors here cover 0-2 meters, 10cm-4m and 0.1-5m.
  • Check the connection: the WiFi sensors use 2.4GHz WiFi, and the submersible sensor uses a 4-20mA output at 24VDC.
  • Check the protection: the Tbest sensor states IP68 and the MORAYELEC sensors state IP66.
  • Check the temperature range: the MORAYELEC sensors work from -10℃ to +70℃.

FAQ: power away from the grid

Which sensor here works over WiFi?

Both MORAYELEC sensors, the ME201R and the ME201W, report through the Tuya Smart Life app.

How many sensors can the app monitor at once?

Up to 10 sensors, for multi-tank monitoring from one app.

Which sensor is submersible?

The Tbest TL-136, an IP68 submersible transmitter with a 4-20mA output for a range of 0 to 2 meters.

What voltage does the ELECALL float switch use?

It is rated for 110V AC/DC, with a 10W maximum and a 12 inch wire, and it needs a relay to drive a pump or alarm.

Which sensor states a 1 year warranty?

Both MORAYELEC sensors, the ME201R and the ME201W, each list a 1 year manufacturer warranty.

MORAYELEC ME201R WiFi Sensor
Still deciding? Our top pickMORAYELEC ME201R WiFi Sensor
Check price on Amazon

See every Emergency Prep guide and all Emergency Gear guides.

More picks: survival water storage, water storage for emergency, water storage containers.