On this page
Electric vehicle charging station dimensions are hard to pin down from the listings in this guide, because only one holder here states its size. The listings are wall-mount holders for the charging handle and cable, not charging stations, and the one stated size belongs to the Lectron holder. The sections below give that size, explain what to measure before ordering, and compare the four holders on materials, mounting and warranty.
SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Electric vehicle charging station dimensions: the short answer
Only the Lectron listing states dimensions: 9.06 by 3.74 by 3.15 inches, at 1.1 pounds. The other three holders state no dimensions and no weight, so their size must be checked against the wall space before ordering. The table lines up what each listing does state.
| Holder | Stated size | Material | In the box | Warranty | Amazon |
|---|---|---|---|---|---|
| Lectron J1772 dock and J-hook | 9.06 by 3.74 by 3.15 inches | Anti-corrosive steel | 1 dock and J-hook, 4 screws, 4 wall plugs | 90 days | |
| FOCSPROD holder | Not stated | PC dock, stainless steel hook | 1 holder, 4 screws, 4 wall anchors | 3 year | |
| bussdis holder with storage box | Not stated | Solid stainless steel | Dock, hook, storage box, screws | 1 year | |
| bussdis dock and J-hook | Not stated | Solid stainless steel | Dock, J-hook, screws | 1 year |
What to measure before ordering
Measure the wall space where the holder will go, and compare it with the stated size when the listing gives one. Only the Lectron listing gives a size, so for the other holders the listing leaves the footprint unclear, and the wall space should be checked against the holder on arrival. Check the connector type too: all four holders fit J1772 connectors, and the FOCSPROD listing asks the buyer to confirm connector type compatibility before ordering. The charger itself needs an outlet installed or checked by a licensed electrician.
Check the mounting surface as well. The bussdis listings state mounting on garage walls, studs or other solid surfaces, the Lectron listing states most flat surfaces, and the FOCSPROD listing states most walls. The Lectron and FOCSPROD listings state indoor and outdoor use, while the bussdis listings name garage walls and solid surfaces without stating outdoor use.
How the holders mount
Every holder here mounts with screws. The Lectron box includes 4 screws and 4 wall plugs, the FOCSPROD box includes 4 screws and 4 wall anchors, and the bussdis listings state that all necessary mounting screws are included. The hook holds the cable off the floor and keeps it from kinking or tangling, and the dock holds the charging handle when it is not in use. The bussdis box holder adds a storage box for the J1772 adapter, and the FOCSPROD holder (on Amazon) adds a 180 degree rotating dock with 5 adjustable positions for the angle.
The holders in this guide
These holders handle the mounting step: they hold the J1772 handle and cable on the wall while the charger stays plugged in. The cards below give each listing’s stated size, materials, mounting parts and warranty.
| # | Product | Solar Score | Buy |
|---|---|---|---|
| 1 |  FOCSPROD J1772 Holder | 9.7/10 | Buy on Amazon |
| 2 |  Lectron J1772 Dock and Hook | 9.6/10 | Buy on Amazon |
| 3 |  bussdis J1772 Holder with Box | 9.6/10 | Buy on Amazon |
| 4 |  bussdis J1772 Dock and Hook | 9.5/10 | Buy on Amazon |
FOCSPROD J1772 Holder
A J1772 charger holder with a 180 degree rotating nozzle dock, 5 adjustable positions and a stainless steel J-hook, with a 3 year warranty.
Pros
- 180 degree rotating dock with 5 adjustable positions
- PC nozzle dock with a stainless steel J-hook
- 3 year warranty stated
- Fits J1772 connectors and adapters, with Rivian, Hummer and Hyundai named
Cons
- No dimensions are stated
- No weight is stated
- PC dock material, not steel throughout
- Indoor and outdoor use is stated, but no weather figure is stated
Detailed Review
FOCSPROD lists a J1772 charger holder with a 180 degree rotating nozzle dock, 5 adjustable positions, a PC nozzle dock and a stainless steel J-hook. The listing states it fits J1772 connectors and adapters, including Rivian, Hummer, Hyundai, Audi, Ford, Chevrolet VOL, Volkswagen, Nissan and BMW, and fits both indoor and outdoor use. The box holds 1 J-hook charging holder, 4 screws and 4 wall anchors. A 3 year warranty is stated. No dimensions and no weight are stated.
Who it's for: J1772 owners who want an adjustable dock angle and a steel hook for the cable. Who should skip it: anyone who needs stated dimensions before ordering.
Its Solar Score of 9.7/10 comes from performance 30/35, build 21/25, value 21/25, safety 6/10 and warranty 4/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Rotation | 180 degrees, 5 positions |
|---|---|
| Materials | PC dock, stainless steel hook |
| In the box | 1 holder, 4 screws, 4 anchors |
| Warranty | 3 year |
Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.
Safety and Warranty
What this listing states. 180 degree rotating dock with 5 positions holds the connector in place; stainless steel J-hook, so safety scores 6 of 10. 3-YEAR warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the charger. Use a charger mode that matches your battery's stated chemistry and voltage, connect in the order the manual gives, and keep it ventilated and dry.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
Lectron J1772 Dock and Hook
A J1772 nozzle holster dock and J-hook in anti-corrosive steel, the only listing here with stated dimensions, with a 90 day warranty.
Pros
- Only listing here that states its dimensions
- Anti-corrosive steel, for indoor and outdoor use
- Holster latches onto the nozzle to keep it from falling out
- Box includes 4 screws and 4 wall plugs
Cons
- 90 day warranty, shorter than the other terms here
- No cable length guidance is stated
- Hook holds the cable off the ground only when mounted
- No storage box for the adapter is included, unlike the bussdis box holder
Detailed Review
Lectron lists a J1772 nozzle holster dock and J-hook in anti-corrosive steel, for indoor and outdoor use, that fits all J1772 connectors. The listing states the holster latches onto the nozzle to keep it from falling out, the hook holds the cable off the ground, and the box includes 1 dock and J-hook, 4 screws and 4 wall plugs. It measures 9.06 by 3.74 by 3.15 inches and weighs 1.1 pounds. A 90 day warranty from the date of purchase is stated.
Who it's for: J1772 owners who want stated dimensions and a latching holster for the nozzle. Who should skip it: anyone who wants a longer warranty term or a storage box for the adapter.
Its Solar Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety 6/10 and warranty 2/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Size | 9.06 x 3.74 x 3.15 in |
|---|---|
| Weight | 1.1 lb |
| Material | Anti-corrosive steel |
| Warranty | 90 days |
Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.
Safety and Warranty
What this listing states. Holster latches onto the nozzle to keep it from falling out; hook holds the cable off the ground, so safety scores 6 of 10. 90 days from the date of purchase stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Match the charger. Use a charger mode that matches your battery's stated chemistry and voltage, connect in the order the manual gives, and keep it ventilated and dry.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
bussdis J1772 Holder with Box
A stainless steel J1772 charger holder with a storage box for the adapter and a hook for the cable, with a 1 year manufacturer warranty.
Pros
- Storage box holds the J1772 adapter
- Solid stainless steel construction
- Integrated hook supports and organizes the cable
- Mounting screws included for wall installation
Cons
- No dimensions are stated
- No weight is stated
- No rotation or angle adjustment is stated
- Fits J1772 connectors only
Detailed Review
bussdis lists a J1772 charger holder wall mount with a storage box for the J1772 adapter, a dock for the charging handle and a hook for the cable. The listing states solid stainless steel construction, rust resistance and mounting screws for wall installation on garage walls, studs or other solid surfaces. A 1 year manufacturer warranty is stated. No dimensions and no weight are stated.
Who it's for: J1772 owners who want a storage box for the adapter and a steel hook for the cable. Who should skip it: anyone who needs stated dimensions or an adjustable dock angle.
Its Solar Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety 5/10 and warranty 3/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Material | Solid stainless steel |
|---|---|
| Includes | Dock, hook, storage box, screws |
| Fits | J1772 connectors |
| Warranty | 1 year manufacturer |
Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.
Safety and Warranty
What this listing states. Stainless steel construction holds the J1772 connector stable and protected; hook supports the cable, so safety scores 5 of 10. 1 year manufacturer warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the charger. Use a charger mode that matches your battery's stated chemistry and voltage, connect in the order the manual gives, and keep it ventilated and dry.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
bussdis J1772 Dock and Hook
A stainless steel J1772 connector dock and J-hook combination that keeps the plug and cable off the floor, with a 1 year warranty.
Pros
- Solid stainless steel construction
- Dock and J-hook combination keeps the plug and cable off the floor
- Integrated hook supports and organizes the cable
- Mounting screws included for wall installation
Cons
- No dimensions are stated
- No storage box is included
- No rotation or angle adjustment is stated
- Fits J1772 connectors only
Detailed Review
bussdis lists a J1772 connector nozzle holster dock and J-hook combination in solid stainless steel. The listing states the dock holds standard J1772 charging connectors stable and protected when not in use, and the hook supports and organizes the cable, keeping the plug and cable off the floor. Mounting screws are included for wall installation on garage walls, studs or other solid surfaces. A 1 year warranty is stated. No dimensions are stated.
Who it's for: J1772 owners who want a simple steel dock and hook to keep the plug and cable off the floor. Who should skip it: anyone who wants a storage box, stated dimensions or an adjustable dock angle.
Its Solar Score of 9.5/10 comes from performance 27/35, build 20/25, value 20/25, safety 5/10 and warranty 3/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Material | Solid stainless steel |
|---|---|
| Includes | Dock, J-hook, screws |
| Fits | J1772 connectors |
| Warranty | 1 year |
Taken from the seller's listing on 14 November 2026. Capacity and output figures are rated by the manufacturer.
Safety and Warranty
What this listing states. Stainless steel construction holds the J1772 connector stable and protected; hook supports the cable, so safety scores 5 of 10. 1 year warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the charger. Use a charger mode that matches your battery's stated chemistry and voltage, connect in the order the manual gives, and keep it ventilated and dry.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
FAQ: power away from the grid
What are the dimensions of an EV charging station holder?
Only the Lectron listing states dimensions: 9.06 by 3.74 by 3.15 inches, at 1.1 pounds. The other three holders in this guide state no dimensions.
Do these holders fit all electric vehicles?
They fit J1772 connectors. The FOCSPROD listing names Rivian, Hummer, Hyundai, Audi, Ford, Chevrolet VOL, Volkswagen, Nissan and BMW, and asks the buyer to confirm connector type compatibility before ordering.
What is in the box?
The Lectron box includes 1 dock and J-hook, 4 screws and 4 wall plugs. The FOCSPROD box includes 1 holder, 4 screws and 4 wall anchors. The bussdis listings state that all necessary mounting screws are included.
Can these holders be used outdoors?
The Lectron and FOCSPROD listings state indoor and outdoor use. The bussdis listings name garage walls, studs and solid surfaces without stating outdoor use.
What warranty do these holders carry?
The FOCSPROD listing states a 3 year warranty, the two bussdis listings each state a 1 year warranty, and the Lectron listing states 90 days from the date of purchase.
Related solar guides
See every battery chargers and maintainers guide and all batteries and charging guides.
More picks: electric vehicle charging station types, best J1772 type 2 adapter, NACS vs J1772 adapter and battery charger connector types.
