On this page
The 12v fan vs 24v fan question comes down to the voltage already on hand: a dead phone at a campsite at dusk, a van fridge humming through a cloudy week, or an inflatable display that stays dark because the blower and the supply disagree. This comparison looks at 2 blower listings, a 12V example with an adapter and lights and a 24V example built for printer cooling, and sets out what each listing states on voltage, power, speed, size, protection and warranty. The short verdict: match the fan to the supply voltage, then weigh the extras each listing states.
SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
12v fan vs 24v fan: side by side
| Fan | Solar Score | Voltage | Power | Speed | Size |
|---|---|---|---|---|---|
| Reeooue 12V Inflatable Blower | 9.6/10 | 12V | 9.6W | 4500 RPM | 3.8 x 3.8 in |
| WINSINN 50mm 5015 Blower Fan | 9.6/10 | 24V | 2.4W | 5500 RPM | 50mm x 50mm x 15mm |
Figures in this table are the manufacturer’s ratings as listed, captured 11 November 2026.
Voltage and power
Voltage is the line that divides this pair. The Reeooue example runs on 12V, with the fan drawing 0.8A and the included adapter rated at 12V and 1.0A, for 9.6W of power. The WINSINN example runs on 24V, drawing 0.1A for 2.4W. A fan wired to the wrong voltage will not run as the listing describes it, so the supply voltage in the van, cabin, printer or display decides the side before any other figure gets a look. Power draw alone does not settle the comparison: the 12V example carries LED lighting on its 9.6W, while the 24V example states its cooling figures separately.
Speed and airflow
Both listings state a speed figure, so speed can be compared directly: the WINSINN states 5500 RPM and the Reeooue states 4500 RPM. Airflow is a different story. The WINSINN states airflow of 3.23 CFM with air pressure of 16.28 mmH2O and noise of 40 dBA, which gives a cooling buyer figures to work with. The Reeooue states no airflow figure at all, so its cooling output stays unclear and the higher speed figure on the 24V side cannot be read as more air moved. Speed is a stated figure; airflow is the figure that moves air, and only the 24V example states it.
Size, lights and extras
The WINSINN measures 50mm by 50mm by 15mm, a compact blower for a printer hotend or other tight spot, with an 11.8 inch cable listed as 300mm and an XH2.54 connector. The Reeooue measures 3.8 inches in the title, with the spec table listing 3.85 inches by 3.85 inches by 2.56 inches, and it brings extras the other listing does not: 3 LED light panels with 2 LED beads each and a 6.5FT light string, plus the adapter. The WINSINN comes as a pack of 4.
Protection and warranty
Protection is where the 12V example stands out. The Reeooue states an IP68 code in its title and bullets, and the listing contrasts that with a typical IP44 for rivals. The WINSINN states no protection code, so a buyer who needs a stated code for damp or dusty spots has nothing to check against on the 24V side. Warranty runs the other way: the WINSINN states a 2-year warranty, while the Reeooue states no warranty term. Neither listing states a UL mark.
What the listings leave unclear
A few figures in these listings disagree with each other. The Reeooue title gives 3.8 inches where the spec table gives 3.85 inches by 3.85 inches by 2.56 inches, and the title says 3 LED bulbs where the bullets describe 3 panels with 2 beads each. The WINSINN bullets spell the speed as 5500PRM, and the spec table lists the size in inch figures that do not match the 50mm size in the title and bullets. The spec table also lists an item weight of 0.22 pounds with no note on whether that covers the pack of 4. Where the listings disagree, the title and bullets win, and where a figure is missing, this article says so instead of filling the gap.
The kits we chose
Reeooue 12V Inflatable Blower
A 12V inflatable blower fan with a 1.0A adapter, 3 LED light panels and a stated IP68 code, running at 4500 RPM on 9.6W.
Pros
- IP68 code stated in the title and bullets
- Adapter included at 12V and 1.0A, with the fan drawing 12V and 0.8A
- 3 LED light panels, each with 2 LED beads, plus a 6.5FT light string
- 4500 RPM at 9.6W stated
Cons
- No warranty term is stated
- No airflow figure is stated
Detailed Review
The listing states a 12V blower fan for inflatables with a fan current of 0.8A, an adapter at 12V and 1.0A, 9.6W of power, a speed of 4500 RPM, 3 LED light panels with 2 LED beads each and a 6.5FT light string. It states an IP68 code and measures 3.85 inches by 3.85 inches by 2.56 inches in the spec table, while the title gives 3.8 inches. The title also says 3 LED bulbs where the bullets describe 3 panels, so the light count reads differently in each place.
Who it's for: owners with a 12V supply who want a blower with lights for an inflatable display. Who should skip it: anyone who needs a stated warranty term or a stated airflow figure.
Its Solar Score of 9.6/10 comes from performance 29/35, build 20/25, value 20/25, safety 8/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Voltage | 12V, 0.8A fan, 1.0A adapter |
|---|---|
| Power | 9.6W, 4500 RPM |
| Size | 3.8 in per title; 3.85 x 3.85 x 2.56 in per spec table |
| Protection | IP68 code stated |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. IP68 code stated in the title and bullets, above the typical IP44 the listing cites, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Fans and pumps. Keep fingers and cords away from moving blades and intakes, run pumps only submerged as the maker directs, and treat airflow and flow rates as the maker's figures.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
WINSINN 50mm 5015 Blower Fan
A 24V 50mm blower fan for 3D printer cooling, sold as a pack of 4, with a stated 2.4W draw, 5500 RPM speed, 3.23 CFM airflow and a 2-year warranty.
Pros
- Airflow of 3.23 CFM and air pressure of 16.28 mmH2O stated
- Noise of 40 dBA and a life of 35,000 hours stated
- Hydraulic bearing and brushless design stated
- 2-year warranty stated, plus a pack of 4
Cons
- No protection code is stated
- Speed line in the bullets reads 5500PRM
Detailed Review
The listing states a 24V blower fan at 0.1A and 2.4W, a speed of 5500 RPM, airflow of 3.23 CFM, air pressure of 16.28 mmH2O, noise of 40 dBA, a hydraulic bearing, brushless cooling and a life of 35,000 hours, sold as a pack of 4 with a 2-year warranty. The size is 50mm by 50mm by 15mm in the title and bullets, while the spec table lists inch figures that do not match. The cable is 11.8 inches, listed as 300mm, with an XH2.54 connector.
Who it's for: owners with a 24V supply who cool a 3D printer hotend or other small electronics and want stated airflow and pressure figures. Who should skip it: anyone on a 12V supply, or anyone who wants a stated protection code.
Its Solar Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety 0/10 and warranty 2/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Voltage | 24V, 0.1A, 2.4W |
|---|---|
| Speed | 5500 RPM |
| Airflow | 3.23 CFM, 16.28 mmH2O |
| Size | 50mm x 50mm x 15mm |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. No weather rating or protection feature is stated, so safety scores zero. 2-years Warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Fans and pumps. Keep fingers and cords away from moving blades and intakes, run pumps only submerged as the maker directs, and treat airflow and flow rates as the maker's figures.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
Where the points went
The Solar Score weighs performance, build, value, safety and warranty. For fans, safety means a stated protection code or another safety feature the listing names; the Reeooue states an IP68 code and the WINSINN states none. The WINSINN states a 2-year warranty and the Reeooue states no warranty term. How we pick explains the weights.
| Product | Solar Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Reeooue 12V Inflatable Blower | 9.6 | 29 | 20 | 20 | 8 | 0 |
| WINSINN 50mm 5015 Blower Fan | 9.6 | 32 | 21 | 21 | 0 | 2 |
The Solar Score runs on a 9.2 minimum and a 9.8 maximum, and the weighted point total is placed on that line in proportion, so more points can only raise it.
12v fan vs 24v fan: which should you choose?
Choose the 12V side if the supply on hand is 12V and the job is an inflatable display or another 12V setup that gains from the adapter, the LED lights and the stated IP68 code. Choose the 24V side if the supply on hand is 24V and the job is cooling a 3D printer hotend or other small electronics, where the stated airflow, pressure and noise figures and the 2-year warranty matter. Voltage comes first: a fan that does not match the supply is the wrong pick no matter what else the listing states.
| If you need | Look at |
|---|---|
| 12V supply with lights | Reeooue 12V Inflatable Blower, 9.6W, 4500 RPM |
| 24V printer cooling | WINSINN 50mm 5015 Blower Fan, 3.23 CFM |
| Stated protection code | Reeooue 12V Inflatable Blower, IP68 |
| Stated warranty term | WINSINN 50mm 5015 Blower Fan, 2-year warranty |
Match the voltage first
A 12V fan belongs on a 12V supply and a 24V fan belongs on a 24V supply, and the listings here give no sign that either example runs on the other voltage. Check the supply in the van, cabin, printer or display before ordering, and check the adapter that comes with the Reeooue against the same supply. For more 12V options, see the best 12v dc fan guide.
Check the size against the space
The WINSINN at 50mm by 50mm by 15mm fits tight spots around a printer hotend, while the Reeooue at 3.8 inches in the title suits an inflatable display with room for a blower and a light string. Measure the space first, then compare it with the size the title and bullets state, since the spec tables here disagree with the titles. Camper van owners can compare sizes in the best 12v fan for camper van guide.
Weigh protection against warranty
Protection and warranty pull in opposite directions here. The Reeooue states an IP68 code and no warranty term, while the WINSINN states a 2-year warranty and no protection code. Pick the side whose stated strength matches the risk: damp or dusty spots call for a stated code, while long service calls for a stated warranty term. Greenhouse setups face damp air too, so the best solar fan for greenhouse guide is worth a look.
Sizing Notes
- Match the fan voltage to the supply voltage: 12V for the Reeooue example, 24V for the WINSINN example.
- Match the fan size to the space: 50mm by 50mm by 15mm for the WINSINN, 3.8 inches in the title for the Reeooue.
- Match the stated airflow to the cooling job: the WINSINN states 3.23 CFM, while the Reeooue states no airflow figure.
- Check the stated protection code and warranty term together: IP68 with no warranty term on the Reeooue, a 2-year warranty with no protection code on the WINSINN.
- Fuse the positive lead as the manual directs, and leave any work on household wiring to a licensed electrician.
FAQ: power away from the grid
Can a 12V fan run on a 24V supply?
No, not as the listings describe it. The Reeooue example is a 12V fan with a 12V adapter, and the WINSINN example is a 24V fan, so each belongs on the supply voltage its listing states.
Which fan here states an airflow figure?
The WINSINN. It states airflow of 3.23 CFM with air pressure of 16.28 mmH2O, while the Reeooue states no airflow figure.
Which fan here has a stated warranty?
The WINSINN, with a 2-year warranty stated. The Reeooue listing states no warranty term.
What size is the WINSINN blower fan?
The title and bullets give 50mm by 50mm by 15mm. The spec table lists inch figures that do not match, so the title and bullets win.
Does the 12V fan include lights?
Yes. The Reeooue listing states 3 LED light panels with 2 LED beads each and a 6.5FT light string, plus an adapter at 12V and 1.0A.
Related solar guides
See every Solar Fans and Pumps guide and all Solar Lights, Cameras and Fans guides. For 12V options, see the best 12v dc fan guide, and for greenhouse cooling, the best solar fan for greenhouse guide. Also see the best 12v fan for rv fridge.
