Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Power Stations and Generators

How Does Fire Extinguisher Work: Step by Step

How a fire extinguisher works: pressure drives the agent out of the cylinder and onto the base of the fire, where it removes heat, fuel or oxygen.

How Does Fire Extinguisher Work: Step by Step
On this page

A fire extinguisher works by pushing its agent out of a sealed cylinder and onto the base of a fire, and how does fire extinguisher work comes down to what that agent does when it lands: it cools the fuel, smothers the flames or breaks the chemical reaction that keeps the fire burning. The cylinder stays under pressure until the handle is squeezed, so the agent is ready the moment it is needed. The sections below walk through the parts, the agent types and the steps to use it.

SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Inside the cylinder, the agent sits under pressure from a gas charge. Squeezing the handle opens a valve, the pressure pushes the agent up a tube and out through the hose and nozzle, and the agent lands on the burning material. Water and foam cool the fuel, foam and dry chemical smother the flames, carbon dioxide pushes oxygen away from the fire, and dry chemical also breaks the chemical reaction. A fire needs heat, fuel and oxygen together, so removing any side of that triangle stops the burning.

How does fire extinguisher work inside the cylinder

Most home extinguishers are stored-pressure units: the agent and the pressurising gas share one cylinder, so the unit is always ready. A siphon tube runs from the valve down to the bottom of the cylinder, where the agent sits. The handle stays locked by a pin and a tamper seal until it is needed. When the handle is squeezed, the valve opens, pressure drives the agent up the tube and out of the nozzle, and the spray keeps coming until the handle is released or the cylinder runs empty. A pressure gauge on the valve shows whether the charge is still in its working zone, so a glance tells you if the unit is ready.

Step 1: Match the class to the fire

Extinguishers carry a letter class that says which fires they suit, and the class is stamped on the label. Match the letter to what is burning before you squeeze the handle, because the wrong agent can spread a fire or make it worse. Water on a liquid fuel fire can spread the burning liquid, and water on live electrical equipment can shock the user, so the class matters more than the size of the unit.

Fire class What burns Agent that fits
Class A Wood, paper, cloth and dry rubbish Water, foam or dry chemical
Class B Flammable liquids such as gasoline and oil Foam, dry chemical or carbon dioxide
Class C Live electrical equipment Dry chemical or carbon dioxide
Class D Combustible metals Dry powder made for metal fires
Class K Cooking oils and fats Wet chemical

Many home units carry more than one letter, so a single unit can cover the common fires in a house. Read the label on the unit in front of you, and do not guess the class from the colour of the cylinder.

Step 2: Use the PASS steps

  • Pull: pull the pin and break the tamper seal.
  • Aim: aim the nozzle low, at the base of the fire.
  • Squeeze: squeeze the handle to start the spray.
  • Sweep: sweep from side to side until the flames are out.

Keep watching the spot after the flames die, because a hot surface can light up again. Work with your back to a clear exit, and stop if the fire does not shrink.

Step 3: Know when to leave

An extinguisher suits a small fire that has just started, with a clear way out behind you. Leave at once if the fire is spreading, if smoke is filling the room, if the heat keeps you from getting close, or if the cylinder runs empty and the fire is still burning. Close the door behind you on the way out, and call for help from outside.

Ways to keep an extinguisher ready

  • Keep it where you can reach it without crossing the fire, near an exit and off the floor.
  • Check the gauge regularly and look for a broken seal or a bent pin.
  • Keep the nozzle clear and wipe off dust so the valve can move freely.
  • Learn the class on the label before you need it, not during a fire.
  • Replace a unit that has been used, even for a short burst, since a partly used cylinder may not hold its charge.

FAQ: power away from the grid

How does a fire extinguisher work?

Pressure inside the cylinder pushes the agent out through the hose and nozzle when the handle is squeezed. The agent cools the fuel, smothers the flames or breaks the chemical reaction, so the fire loses heat, fuel or oxygen and goes out.

What do the letters on an extinguisher mean?

The letters are fire classes: A for wood, paper and cloth, B for flammable liquids, C for live electrical equipment, D for combustible metals and K for cooking oils. Match the letter to what is burning.

Can one extinguisher handle every fire?

No single unit suits every fire, and the wrong agent can spread a fire or shock the user. Many home units carry more than one letter, so read the label and keep the right class where it is needed.

When should I leave instead of using an extinguisher?

Leave if the fire is spreading, if smoke is filling the room, if you cannot get close for the heat, or if the cylinder runs empty while the fire still burns. Get out, close the door and call for help from outside.

How do I know if an extinguisher is still good?

Check the gauge, the pin and the seal, and look for dents, rust or a clogged nozzle. A unit that has been used, even briefly, needs a recharge or a replacement, so do not trust a partly used cylinder.

See the best portable power stations for home backup and the best inverter generators for home backup. For the category, see all Power Stations and Generators guides.