Skip to content
Search
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Charge Controllers

Best MPPT Charge Controller Under $50 (2026): 6 Compared

Six MPPT charge controller picks under $50 for small solar setups, compared on stated current, voltages, battery types and warranty terms.

Best MPPT Charge Controller Under $50 (2026): 6 Compared
On this page

A charge controller sits between your solar panels and your batteries, protecting the batteries from overcharge while squeezing the most power out of the panels. These are the best MPPT charge controller under 50 for small 12V and 24V solar setups, compared on stated current, system voltages, battery types and warranty terms. The five picks include two 100A controllers, a brand-name MPPT and two PWM picks, with one more option after the picks. Every spec below is taken from the listings themselves, so you can compare the numbers head to head before you wire anything up.

SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

The picks

Depvko 100A MPPT Controller

Depvko 100A MPPT Controller

Depvko9.7/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100A MPPT controller with 12, 24, 36, 48V auto-detect, 4 battery types, dual USB, LCD and a 1 year warranty stated. Read the specs and the review below before you wire it up.

Pros

  • 100A with 12, 24, 36, 48V auto-detect stated
  • Sealed, GEL, flooded and LiFePO4 battery types stated
  • 99.5% efficiency with dual 5V USB ports stated
  • 1 year warranty with lifetime technical support stated

Cons

  • Notes say it combines MPPT and PWM, not full MPPT
  • Aluminum housing at 1.5 pounds
  • Connect the battery before the panel
  • LCD with 7 modes needs the manual to master
Detailed Review

The listing states a 100A MPPT solar charge controller with auto-detect for 12V, 24V, 36V and 48V systems, 99.5% efficiency, dual 5V USB ports, a backlit LCD with 7 modes, sealed, GEL, flooded and LiFePO4 battery types, comprehensive voltage protection, a 7 by 5 by 2.5 inch aluminum housing, and a 1 year warranty with lifetime technical support. The notes say it combines MPPT and PWM technologies and may not offer full MPPT functionality. Everything quoted here comes from the listing itself.

Who it's for: small solar owners who want the most documented features per amp here. Who should skip it: anyone who needs a true full-MPPT design.

Its Solar Score of 9.7/10 comes from performance 29/35, build 20/25, value 21/25, safety 9/10 and warranty 3/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Current100A
Voltages12, 24, 36, 48V
Efficiency99.5%
Warranty1 year

Figures as published on the retailer listing, collected 22 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. Comprehensive protections stated, so safety scores 9 of 10. 1 year warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Stay under the input limit. Keep your panels' combined open circuit voltage, with cold weather margin, under the controller's stated maximum PV input, connect the battery first unless the manual says otherwise, and fuse both sides as the manual directs.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Depvko 100A Controller

Depvko 100A Controller

Depvko9.7/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100A MPPT controller with 12V/24V auto recognition, LCD display, dual USB ports and a timer, per the listing.

Pros

  • 100A with 12V/24V auto recognition stated
  • LCD screen with real-time performance updates stated
  • Dual USB ports and adjustable timer setting stated
  • Full 12-month warranty for quality issues stated

Cons

  • 12V/24V only, with no 36V or 48V support stated
  • No max PV input volts stated
  • Protection list is shorter than the SOGTICPS
  • No weight or dimensions stated in the extracted listing
Detailed Review

The listing states a 100A MPPT solar charge controller with 12V/24V auto recognition, an LCD screen with real-time updates, dual USB ports and an adjustable timer setting. It states built-in defenses against overcharging, short-circuits and reverse polarity, and a full 12-month warranty for quality-related issues with lifetime technical support. No max PV input volts, weight or dimensions are stated in the extracted listing.

Who it's for: 12V or 24V system owners who want 100A with a simple LCD and timer. Who should skip it: anyone planning a 36V or 48V bank.

Its Solar Score of 9.7/10 comes from performance 32/35, build 20/25, value 21/25, safety 7/10 and warranty 3/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Amps100A
Battery volts12V/24V auto
DisplayLCD, real-time updates
ExtrasDual USB, timer

Figures as published on the retailer listing, collected 21 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. Overcharging, short-circuit and reverse polarity defenses stated, so safety scores 7 of 10. Full 12-month warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Stay under the input limit. Keep your panels' combined open circuit voltage, with cold weather margin, under the controller's stated maximum PV input, connect the battery first unless the manual says otherwise, and fuse both sides as the manual directs.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Renogy Voyager 20A PWM

Renogy Voyager 20A PWM

Renogy9.7/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20A PWM controller with 12/24V auto-detect, an IP67 rating and a backlit LCD, built for AGM, Gel and Flooded banks on boats, RVs and off-grid setups.

Pros

  • Auto-detects 12V or 24V with AGM, Gel and Flooded battery types, with a manual lithium activation feature
  • 4-stage charging (Bulk, Absorption, Float, Equalization) listed
  • IP67 rating stated in the title and bullets
  • 2-year material and workmanship warranty stated

Cons

  • Spec table lists 50V max PV input and a Wanderer 10A parameter while the title and bullets state 55V and a Voyager 20A; trust the title
  • Bluetooth monitoring needs the BT-1 module, sold separately
  • Spec table lists Negative ground against positive ground in the title
  • No panel wattage guidance is stated
Detailed Review

The listing states a 20A PWM controller that auto-detects 12V or 24V with AGM, Gel and Flooded batteries, plus a manual lithium activation feature. It lists 4-stage charging (Bulk, Absorption, Float, Equalization), protection against reverse polarity, overcharge, short-circuit, reverse current, overload and over-discharge, an IP67 rating, a backlit LCD showing charging current, generated energy, temperature, battery voltage and error codes, RS232 communication with Bluetooth via a BT-1 module sold separately, dimensions of 6.08 by 3.83 by 1.4 inches, 8.8 ounces and a 2-year material and workmanship warranty. The spec table contradicts the title in three places: it lists 50V max PV input against 55V, a Wanderer 10A parameter against a Voyager 20A, and Negative ground against positive ground, so trust the title and bullets.

Who it's for: RV and boat owners who want an auto-sensing 12/24V controller with a stated IP67 rating for an AGM, Gel or Flooded bank. Who should skip it: buyers who need a stated protection list for a lithium-only bank or want Bluetooth built in.

Its Solar Score of 9.7/10 comes from performance 30/35, build 22/25, value 21/25, safety 7/10 and warranty 3/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Controller type20A PWM, 12/24V auto-detect
PV input55V max per title and bullets
DisplayBacklit LCD with error codes
Size6.08 x 3.83 x 1.4 in, 8.8 oz

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. IP67 rating and reverse polarity, overcharge, short-circuit, reverse current, overload and over-discharge protection stated, so safety scores 7 of 10. 2-year material and workmanship warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Stay under the input limit. Keep your panels' combined open circuit voltage, with cold weather margin, under the controller's stated maximum PV input, connect the battery first unless the manual says otherwise, and fuse both sides as the manual directs.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Renogy Wanderer 10A

Renogy Wanderer 10A

Renogy9.6/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10A PWM controller with LCD, 12/24V support, temperature compensation and a 2-year warranty.

Pros

  • 12V/24V with 50V PV input, the widest PV range of the PWM picks
  • 4-stage charging with temperature compensation stated
  • 5V/2A USB port for phones and tablets
  • 2-year material and workmanship warranty stated

Cons

  • PWM, not MPPT
  • Lithium needs manual activation
  • IP32 rating, the lowest stated here
  • Bluetooth needs the BT-1 module, sold separately
Detailed Review

The listing states a 10A PWM controller for 12V/24V systems with 50V PV input, 4-stage charging (bulk, boost, float, equalization) for AGM, gel, flooded and lithium batteries, an LCD, a 5V/2A USB port, negative ground and temperature compensation. It lists protection against overcharge, over-discharge, overload, short circuit and reverse polarity, an IP32 rating and a 2-year material and workmanship warranty. Lithium charging needs manual activation, and Bluetooth needs the BT-1 module sold separately.

Who it's for: small 12V or 24V setups that want a documented PWM controller with a 2-year warranty. Who should skip it: anyone set on MPPT tracking.

Its Solar Score of 9.6/10 comes from performance 26/35, build 20/25, value 20/25, safety 7/10 and warranty 3/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Controller10A PWM
PV input50V max
Battery12/24V, Li manual
DisplayLCD, 5V/2A USB

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. Overcharge, over-discharge, overload, short-circuit and reverse polarity protection with temperature compensation stated, so safety scores 7 of 10. 2-year material and workmanship warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Stay under the input limit. Keep your panels' combined open circuit voltage, with cold weather margin, under the controller's stated maximum PV input, connect the battery first unless the manual says otherwise, and fuse both sides as the manual directs.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Victron BlueSolar MPPT

Victron BlueSolar MPPT

Victron Energy9.5/10 Solar Score
i
The Solar Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Victron MPPT controller with 75V, 10A, 12/24V, fast tracking and UL1741 stated. Read the specs and the review below before you wire it up.

Pros

  • UL1741 certification stated in the title
  • Fast optimum power point tracking stated
  • 75V with 12/24V systems stated
  • Victron brand with VictronConnect app support stated

Cons

  • No Bluetooth built in: dongle sold separately
  • 10A suits small arrays only
  • No specific warranty term stated
  • Plastic housing stated
Detailed Review

The listing states a Victron Energy BlueSolar MPPT solar charge controller with 75V, 10A, 12/24V systems, fast optimum power point tracking, intelligent charge algorithms, UL1741 certification, and remote monitoring through a Bluetooth dongle sold separately. No specific warranty term is stated. Everything quoted here comes from the listing itself.

Who it's for: brand buyers who want documented certification and fast tracking. Who should skip it: anyone who needs built-in Bluetooth or more than 10A.

Its Solar Score of 9.5/10 comes from performance 27/35, build 19/25, value 18/25, safety 9/10 and warranty 0/5: 73 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Current10A
Voltages12/24V / 75V
CertUL1741

Figures as published on the retailer listing, collected 22 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. UL1741 stated, so safety scores 9 of 10. No warranty term, so warranty scores zero. See How We Pick.

Stay under the input limit. Keep your panels' combined open circuit voltage, with cold weather margin, under the controller's stated maximum PV input, connect the battery first unless the manual says otherwise, and fuse both sides as the manual directs.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

Compare the picks

Controller Solar Score Current Voltages Warranty Amazon
Depvko 100A MPPT Controller 9.7/10 100A 12, 24, 36, 48V 1 year View on Amazon
Victron BlueSolar MPPT 9.5/10 10A 12/24V Not stated View on Amazon
Depvko 100A MPPT Reused 9.7/10 100A Not stated Not stated
Renogy Voyager 20A PWM 9.7/10 20A Not stated Not stated View on Amazon
Renogy Wanderer 10A PWM 9.6/10 10A 12/24V Not stated

Specifications are manufacturer rated as listed, collected 22 October 2026.

How we scored them

The Solar Score weighs performance, build, value, safety and warranty. For a controller, safety means the stated protections and certifications; two picks state documented protections or a UL certification. One pick states a warranty term. How we pick explains the weights.

Product Solar Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Depvko 100A MPPT Controller 9.7 29 20 21 9 3
Victron BlueSolar MPPT 9.5 27 19 18 9 0

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

How to choose the best MPPT charge controller under 50

Match current and system voltage

Size the controller to the panel array. Both Depvko picks state 100A. The Renogy Voyager states 20A and the Renogy Wanderer states 10A with 12/24V. The Victron states 10A with 75V and 12/24V. The Depvko 100A also auto-detects 12V, 24V, 36V and 48V systems, which covers everything from a single 12V battery to a larger 48V bank. The smaller 10A and 20A picks suit one or two panels feeding a single battery. For 24V systems specifically, see our best MPPT charge controller for 24V system picks.

Read the battery types and protections

The Depvko 100A handles sealed, GEL, flooded and LiFePO4 batteries with over-voltage, over-current, reverse polarity and overheating protection stated. The Renogy Voyager is for AGM, gel and flooded batteries, the three classic lead-acid types. The Depvko also states protections against over-voltage, over-current, deep discharge and reverse polarity, plus a real-time panel voltage display for troubleshooting. The Victron states intelligent charge algorithms with UL1741 certification. For lead-acid setups, see our best solar charge controller for lead acid battery guide.

Controller Current Voltages Battery types
Depvko 100A MPPT Controller 100A 12, 24, 36, 48V Sealed, GEL, flooded, LiFePO4
Victron BlueSolar MPPT 10A 12/24V Not stated
Depvko 100A MPPT Reused 100A Not stated Not stated
Renogy Voyager 20A PWM 20A Not stated AGM, gel, flooded
Renogy Wanderer 10A PWM 10A 12/24V Not stated

MPPT or PWM

The Depvko 100A states MPPT with 99.5% efficiency, though its notes say it combines MPPT and PWM technologies and may not offer full MPPT functionality. The Victron is a true MPPT with fast optimum power point tracking. The Renogy Wanderer and Voyager are PWM controllers, which are simpler and cheaper per amp. One more note from the Depvko listing: it may not offer full MPPT functionality, since it combines MPPT and PWM charging technologies. That is honest documentation, and the price reflects it. For the full comparison, see our MPPT vs PWM charge controller guide.

Check the display and extras

The Depvko 100A has a backlit LCD with 7 modes and dual 5V USB ports. The Victron needs a Bluetooth dongle, sold separately, for wireless monitoring through VictronConnect. The Renogy Wanderer has an LCD. Always connect the battery before the solar panel: the Depvko notes this as a startup reminder, because the controller needs battery power to start and detect the system voltage. Get this order wrong and the controller may misread your system. For PWM options, see our best PWM charge controller for 12V battery picks.

Sizing Notes

  • Match stated current to the array: 100A on both Depvko picks, 20A on the Voyager, 10A on the Victron and Wanderer.
  • Check the voltages: 12, 24, 36, 48V auto-detect on the Depvko 100A, 75V on the Victron.
  • Read the battery types: sealed, GEL, flooded and LiFePO4 on the Depvko; AGM, gel and flooded on the Voyager.
  • Note the warranties: 1 year on the Depvko 100A, no specific term stated on the other four picks.
  • Remember the MPPT note: the Depvko combines MPPT and PWM; the Victron is a true MPPT.

Frequently Asked Questions

Which pick handles the most current?

Both Depvko picks, at 100A. The Renogy Voyager states 20A, and the Victron and Wanderer state 10A.

Which pick has a UL certification?

The Victron Energy BlueSolar, certified to UL1741 in the listing title.

Which picks are MPPT and which are PWM?

Both Depvko picks state MPPT, with the 100A noting it combines MPPT and PWM. The Victron is MPPT. The Renogy Wanderer and Voyager are PWM.

Which picks state a warranty?

The Depvko 100A states 1 year with lifetime technical support. The other four picks state no specific warranty term.

Does the Victron have Bluetooth built in?

No. The listing says the BlueSolar needs a Bluetooth dongle, sold separately, for wireless monitoring. Built-in Bluetooth is on the SmartSolar range.

Depvko 100A MPPT Controller
Still deciding? Our top pickDepvko 100A MPPT Controller
Check price on Amazon

See all Solar Lights, Cameras and Fans guides.

More picks: best MPPT charge controller for 24V system, best solar charge controller for lead acid battery, MPPT vs PWM charge controller, best PWM charge controller for 12V battery. Also outside this roundup: the HHFLY 30A MPPT controller with 12/24V auto-detect, 3-stage charging, dual USB and 7 protections stated.