On this page
The short answer on bluetti elite 30 v2 vs river 3 plus: the BLUETTI side is a portable power station that supplies power, while the River 3 Plus side in this listing is a tool pegboard that stores tools and supplies no power at all. A campsite at dusk with a dead phone, or a home in an outage at dinner time, is where a power station earns its place, and only the BLUETTI listing here is a station. Pick the BLUETTI Elite 30 V2 for portable power with UPS backup; pick the EcoFlow pegboard only when a RIVER 3 Plus station is already on hand and its tools need a home.
SolarKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Bluetti Elite 30 V2 vs River 3 Plus: side by side
| Power station | BLUETTI Elite 30 V2 | EcoFlow River 3 Plus Pegboard | |
|---|---|---|---|
| Capacity | 288Wh | Not stated | |
| Continuous output | 600W | Not stated | |
| Surge / Power Lifting | 1500W | Not stated | |
| Weight | 9.4 lb | Not stated | |
| Size | 9.8 x 7.0 x 6.6 in | 9.1 x 9.2 x 0.5 in | |
| Solar Score | 69 | 25 |
These specs are rated by the maker and quoted from each listing on 9 November 2026.
What the BLUETTI station states
The BLUETTI listing states a 288Wh LiFePO4 station with 600W of continuous output and 1500W in Power Lifting mode, aimed at camping, road trips, beach visits and home emergencies. Wall charging runs at 380W, adjustable to 200W, and reaches 80% in 45 minutes and 100% in 70 minutes. The listing names 8 charging modes, covering AC wall, solar and car charging, and pairs solar recharging with the PV60L panel. Standby draw is 4.5W, DC draw is 5W and AC draw is 8W, and the maker claims 50% lower power consumption from UltraCell tech and a smart cooling system. The station measures 9.8 by 7.0 by 6.6 inches, the bullets list 9.4 lb, and the box holds the station, an AC charging cable, a car charging cable and a user manual.
What the River 3 Plus listing actually is
The River 3 Plus listing is not a station at all. It is a sturdy attachable tool pegboard for the RIVER 3 Plus, RIVER 3 Max and RIVER 3 Max Plus, with adjustable straps for tools of various sizes, residue-free adhesive tape that leaves no marks on the power station, and stickers to customize the station. It measures 9.1 by 9.2 by 0.5 inches and comes in Black, model EFR703. It states no capacity, no output watts, no battery chemistry and no charging figures, so the two sides cannot be compared on power from these listings.
Weight and size
The BLUETTI station measures 9.8 by 7.0 by 6.6 inches, and the bullets list 9.4 lb, which fits a station meant to move from a campsite to a porch. The pegboard measures 9.1 by 9.2 by 0.5 inches, a flat panel that attaches to the station, and its listing states no weight.
Charging and backup
Charging and backup sit entirely on the BLUETTI side. The BLUETTI listing states 8 charging modes, 380W wall charging with 0 to 80% in 45 minutes and 0 to 100% in 70 minutes, and a UPS mode that engages within 10ms during an outage. The pegboard listing states no charging mode, no input watts and no UPS function, so this section has no River 3 Plus figure to set beside the BLUETTI figures. Solar recharging on the BLUETTI side pairs with the PV60L panel the listing names, with no solar input watt figure stated.
What the listings leave unclear
Some gaps deserve a plain statement. The BLUETTI bullets list 9.4 lb while the spec table lists 9.5 pounds, and the bullets take priority, so this article uses 9.4 lb. Neither listing states a warranty term, a weight for the pegboard, or a UL, ETL or FCC mark, an IP code or a BMS. The BLUETTI listing names the PV60L panel for solar recharging but gives no solar input watt figure, and the pegboard listing gives no power figure of any kind.
Two examples
BLUETTI Elite 30 V2
A 288Wh LiFePO4 power station with 600W continuous output, 1500W Power Lifting mode, fast 380W wall charging and a UPS mode that engages within 10ms.
Pros
- 288Wh capacity with 600W continuous output and 1500W Power Lifting mode
- Wall charging at 380W reaches 80% in 45 minutes and 100% in 70 minutes
- UPS mode engages within 10ms during an outage
- 8 charging modes, including AC wall, solar and car charging
Cons
- No warranty term is stated
- No solar input watt figure is stated, only the PV60L panel pairing
- Loads above 600W need Power Lifting mode for 1500W
Detailed Review
The listing states a 288Wh LiFePO4 power station with 600W continuous output and 1500W in Power Lifting mode, 380W wall charging that reaches 80% in 45 minutes and 100% in 70 minutes, and 8 charging modes covering AC wall, solar and car charging. The UPS mode engages within 10ms, standby draw is 4.5W, DC draw is 5W and AC draw is 8W, and the maker claims 50% lower power consumption from UltraCell tech and a smart cooling system. The station measures 9.8 by 7.0 by 6.6 inches, and the box holds the station, an AC charging cable, a car charging cable and a user manual. The bullets list 9.4 lb while the spec table lists 9.5 pounds; the bullets take priority, so this article uses 9.4 lb.
Who it's for: campers, road trippers and homeowners who want a light 288Wh station with fast wall charging and UPS backup for a laptop, a car fridge or a CPAP machine. Who should skip it: anyone who needs more than 600W continuous without Power Lifting mode, or a stated warranty term.
Its Solar Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety 7/10 and warranty 0/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Capacity | 288Wh |
|---|---|
| Output | 600W continuous, 1500W Power Lifting |
| Wall charge | 380W, 0-80% in 45 minutes |
| Size | 9.8 x 7.0 x 6.6 in, 9.4 lb |
Figures as published on the retailer listing, collected 9 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. LiFePO4 battery, UPS mode with 10ms changeover and smart cooling system stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Power station limits. Stay within the stated continuous output and solar input limits, keep the unit ventilated and dry, charge within the stated temperature range, and never connect it to home wiring except through equipment a licensed electrician installs.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
EcoFlow River 3 Plus Pegboard
A tool pegboard accessory for the RIVER 3 Plus, RIVER 3 Max and RIVER 3 Max Plus that holds tools and accessories on the station; it states no capacity, output or battery figure.
Pros
- Fits RIVER 3 Plus, RIVER 3 Max and RIVER 3 Max Plus
- Adjustable straps fit tools of various sizes
- Residue-free adhesive tape leaves no marks on the power station
- Includes stickers to customize the power station
Cons
- States no capacity, watts or battery figure, so it cannot power anything
- No weight is stated
- No warranty term is stated
- The listing states no outlets, ports or charging function
Detailed Review
The listing is for a tool pegboard, not a power station: a sturdy attachable pegboard for the RIVER 3 Plus, RIVER 3 Max and RIVER 3 Max Plus, with adjustable straps, residue-free adhesive tape and stickers to customize the station. It measures 9.1 by 9.2 by 0.5 inches, comes in Black and carries model EFR703. It states no capacity, no output watts, no battery chemistry and no charging figures, so no power comparison with the BLUETTI station is possible from this listing.
Who it's for: owners of a RIVER 3 Plus, RIVER 3 Max or RIVER 3 Max Plus who want tools and accessories stored on the station. Who should skip it: anyone shopping for a power station itself, since this listing holds tools and supplies no power.
Its Solar Score of 9.2/10 comes from performance 6/35, build 15/25, value 10/25, safety 0/10 and warranty 0/5: 31 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Type | Tool pegboard accessory |
|---|---|
| Fits | RIVER 3 Plus, RIVER 3 Max, RIVER 3 Max Plus |
| Size | 9.1 x 9.2 x 0.5 in |
| Color | Black |
Figures as published on the retailer listing, collected 9 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. No UL, FCC or battery management statement is stated, so safety scores zero. No warranty term, so warranty scores zero. See How We Pick.
Power station limits. Stay within the stated continuous output and solar input limits, keep the unit ventilated and dry, charge within the stated temperature range, and never connect it to home wiring except through equipment a licensed electrician installs.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
Where the points went
The Solar Score weighs performance, build, value, safety and warranty. For portable power stations, safety means a stated battery chemistry, a UPS mode, cooling or another protection the listing names; the BLUETTI listing states LiFePO4, UPS mode and a smart cooling system, while the pegboard listing states no safety feature. Neither listing states a warranty term. How we pick explains the weights.
| Product | Solar Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BLUETTI Elite 30 V2 | 9.6 | 30 | 21 | 20 | 7 | 0 |
| EcoFlow River 3 Plus Pegboard | 9.2 | 6 | 15 | 10 | 0 | 0 |
Every total is translated into a figure between 9.2 and 9.8 with a linear formula; ranking by points and ranking by score always agree.
Bluetti Elite 30 V2 vs River 3 Plus: which should you choose?
Pick the BLUETTI Elite 30 V2 for portable power: 288Wh, 600W continuous output, 1500W in Power Lifting mode, fast wall charging and UPS backup in a 9.4 lb station. It suits camping, road trips and home emergencies, the uses the listing names. Pick the EcoFlow pegboard only for a RIVER 3 Plus, RIVER 3 Max or RIVER 3 Max Plus that is already on hand, to keep tools and accessories on the station. For more small-station ideas, see the best portable power station for camping and the portable power station vs inverter generator.
| If you need | Look at |
|---|---|
| Portable power on a trip | BLUETTI Elite 30 V2, 288Wh |
| UPS backup at home | BLUETTI Elite 30 V2, engages within 10ms |
| Fast wall charging | BLUETTI Elite 30 V2, 0 to 80% in 45 minutes |
| Tool storage on a River 3 Plus | EcoFlow River 3 Plus Pegboard |
Sizing Notes
- Match the 288Wh capacity against the loads you plan, such as a laptop, a car fridge or a CPAP machine.
- Keep continuous draw under 600W, and reserve Power Lifting mode for 1500W loads such as a small kettle or a toaster.
- Pair solar recharging with the PV60L panel the listing names.
- Use the AC charging cable and car charging cable the listing includes, and follow the user manual for charging.
FAQ: power away from the grid
Is the EcoFlow River 3 Plus listing a power station?
No. The listing is a tool pegboard accessory for the RIVER 3 Plus, RIVER 3 Max and RIVER 3 Max Plus. It states no capacity, no output watts and no battery figure, so it supplies no power.
How much power does the BLUETTI Elite 30 V2 supply?
The listing states 288Wh of capacity, 600W of continuous output and 1500W in Power Lifting mode.
How fast does the BLUETTI Elite 30 V2 charge from a wall outlet?
The listing states 380W wall charging, with 0 to 80% in 45 minutes and 0 to 100% in 70 minutes.
Does the BLUETTI Elite 30 V2 work as a UPS?
Yes, the listing states a UPS mode that engages within 10ms during an outage.
How heavy is the BLUETTI Elite 30 V2?
The bullets list 9.4 lb, while the spec table lists 9.5 pounds. The bullets take priority, so use 9.4 lb when comparing.
What comes with the BLUETTI Elite 30 V2?
The listing states the Elite 30 V2, an AC charging cable, a car charging cable and a user manual.
Related solar guides
See every Portable Power Stations guide and all Power Stations and Generators guides.
More picks: Bluetti AC60 vs AC70, best 1500Wh power station for camping and expandable vs non-expandable power station.
