Best Solar Panel for Jackery 300: 5 Panels Compared by Spec

The listing states a 100W foldable monocrystalline panel with 23.5% efficiency, IP67, a solar angle guide, 2 kickstands and a 5-in-1 cable with a 10ft lead that names DC7909/8mm for the Jackery 240/300/500, plus a 10-in-1 DC connector set. It lists 9.48 pounds, an unfolded size of 48.43 by 21.06 by 0.98 inches folding down to 24.13 by 21.06 by 1.77 inches, a 24.3V maximum voltage with 20.16V output, dual USB-A and USB-C outputs managed by smart IC chips, and overvoltage, overcurrent, short circuit and overtemperature protection with reverse charging protection on the MC4 output. The listing also states a 12-month warranty and 30-day money-back, and notes the control box is not covered by the panel's weather protection.

Who it's for: Jackery 300 owners who want the connector question settled in the box. Who should skip it: buyers who want a longer warranty term.

Its Solar Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety 8/10 and warranty 3/5: 85 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

What this listing states. IP67 and overvoltage, overcurrent, short circuit and overtemperature protection stated, so safety scores 8 of 10. 12-month warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Panels make voltage in daylight. Keep connectors covered until you connect them, check the panel's stated open circuit voltage and current against your controller or power station input limits, and use cables rated for the current. Roof and permanent mounts belong to a qualified installer.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

The listing states a 100W foldable panel with 23.5% efficient A+ monocrystalline cells, IP67-rated ETFE coating, and two adjustable kickstands. The 5-in-1 cable includes XT60 explicitly for the Anker C300, C300 DC and C200 DC, plus DC8020, Anderson, DC7909 and DC5521 for other stations. Direct device charging runs through USB-C PD (15V/3A) and two USB-A QC3.0 ports with overcurrent and short-circuit protection. The maker states a 12-month warranty with lifetime technical support, and notes to check the power station's input limit.

Who it's for: Anker C300 owners who want the cable in the box with no adapter hunt. Who should skip it: anyone counting ounces, since it is the heaviest 100W here.

Its Solar Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety 8/10 and warranty 3/5: 85 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

What this listing states. IP67 rating stated; overcurrent and short-circuit protection listed, so safety scores 8 of 10. 12-month warranty and lifetime technical support stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Panels make voltage in daylight. Keep connectors covered until you connect them, check the panel's stated open circuit voltage and current against your controller or power station input limits, and use cables rated for the current. Roof and permanent mounts belong to a qualified installer.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

The listing states a 100W foldable monocrystalline panel with 23.5% cell efficiency, IP65, an 18V maximum voltage, kickstands, reinforced grommets for mounting, a zippered accessory pouch and a 2-year manufacturer warranty. It lists an MC4 to Anderson cable, an MC4 to DC5521 cable and DC adapters in 7.9 by 0.9mm, 5.5 by 2.5mm, 3.5 by 1.35mm and 5.5 by 2.1mm sizes, a smart IC chip with overcharging and overload protection, laminated ETFE construction that stands up to splashes and dust while avoiding extended rain exposure or submersion, and support for series and parallel connections to pair it with another panel. The title and bullets say 100W, but the spec table says 200W maximum power with a 200W panel in the included components, so trust the title and bullets for the wattage.

Who it's for: buyers who want a stated 2-year warranty and expansion options. Who should skip it: anyone bothered by the spec table's 200W mismatch.

Its Solar Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 7/10 and warranty 3/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

What this listing states. IP65 and overcharging and overload protection stated, so safety scores 7 of 10. 2 Year Manufacturer warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Panels make voltage in daylight. Keep connectors covered until you connect them, check the panel's stated open circuit voltage and current against your controller or power station input limits, and use cables rated for the current. Roof and permanent mounts belong to a qualified installer.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

The title states the Jackery SolarSaga 100W Air with bifacial 23 percent efficiency, an IP65 rating and foldable charging. The bullets state 7 pounds, a W-fold design, PERC cells at 23 percent, a sun indicator, an IP68 rating, operation from -4F to 149F, IEC TS 63163 certification and an integrated aluminum stand. The title's IP65 and the bullets' IP68 disagree; both are stated, so the rating counts as stated with a discrepancy noted. The bullets also say the dual USB ports deliver 100W each, which would exceed the 100W panel rating, so trust the 100W panel figure. The listing states no warranty term.

Who it's for: Jackery owners who want the brand's own bifacial panel with a stated certification. Who should skip it: owners of the Explorer models the listing names as incompatible, and buyers who want a stated warranty.

Its Solar Score of 9.5/10 comes from performance 29/35, build 20/25, value 20/25, safety 6/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 20 October 2026. Performance figures are manufacturer rated.

What this listing states. IP65 stated in title, IP68 stated in bullets; IEC TS 63163 certified, so safety scores 6 of 10. No warranty term, so warranty scores zero. See How We Pick.

Panels make voltage in daylight. Keep connectors covered until you connect them, check the panel's stated open circuit voltage and current against your controller or power station input limits, and use cables rated for the current. Roof and permanent mounts belong to a qualified installer.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

FlexSolar lists a 100W foldable solar panel at 4.1 lb with a 0.59-inch profile, folding to 12.99 by 10.43 by 2.17 inches. The outputs include PD 45W USB-C, 18W USB-A and 100W DC, with a 4-in-1 charging cable for power stations. The cells are monocrystalline at 23%+ efficiency with an IP67 rating against water and dust. No warranty term is stated.

Who it's for: power stations and phones on camping trips. Who should skip it: buyers who want a stated warranty.

Its Solar Score of 9.5/10 comes from performance 29/35, build 20/25, value 20/25, safety 6/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 19 October 2026. Performance figures are manufacturer rated.

What this listing states. IP67 rating against water and dust is stated, so safety scores 6 of 10. No warranty term, so warranty scores zero. See How We Pick.

Panels make voltage in daylight. Keep connectors covered until you connect them, check the panel's stated open circuit voltage and current against your controller or power station input limits, and use cables rated for the current. Roof and permanent mounts belong to a qualified installer.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.